GEX Exo Terra Timer Thermostat RTT-1 Reptile Thermostat

Immediate purchase OK!!
Operation confirmed.
Includes instruction manual.

An essential thermostat timer for reptile keeping.
No noticeable scratches, in beautiful condition.

Properly manage temperature and lighting to maintain the natural rhythm of your pet!
Target: Reptiles
Country of Origin: Japan

Features:
● A thermostat for reptiles that controls heating and lighting equipment with a single unit.
● Control temperature can be set for both ON and OFF times of the lighting.
● Features an easy-to-set LCD panel.
● Control temperature can be set from 15 to 40℃.
● Equipped with a warning lamp to indicate abnormalities.
● Includes a backup function for peace of mind during power outages.
● Excellent noise resistance to prevent malfunction.

Rated Voltage/Frequency: AC 100V 50/60Hz
Rated Power Consumption: 600W

Specifications:
● Control Temperature Range: 15-40℃
● Usable Heating Equipment Capacity: Up to 300W
● Usable Lighting Equipment Capacity: Up to 300W
● Temperature Display: Integer display
● Warning Display (Lamp): Overheating Alarm (settable within the range of High Temp Setpoint +2℃ to 45℃)
● Overcooling Alarm (settable within the range of 5℃ to Low Temp Setpoint -2℃)
● Sensor Malfunction Alarm, Unit Malfunction Alarm
● Time Display: 4-digit 24-hour display (Time accuracy ±5 minutes/month)
● Backup Function: Maintains for approximately 1 hour (clock, setting timer, set temperature, alarm temperature)
● Usable Temperature Range (Unit): 0-40℃
● Usable Ambient Humidity (Unit): 10-85%

Size (approx.):
Unit Size: Approx. 7.8 x Depth 3 x Height 15.3 cm
Power Cord: Approx. 1.3 cm
Sensor Cord: Approx. 1.5 m
Thermostat Function Outlet Cord: Approx. 0.2 m
Timer Function Outlet Cord: Approx. 0.2 m

How to Use:
● Choose a location for the unit that is protected from water and direct sunlight, with good ventilation. Hang it using commercially available hooks (sold separately).
● Install the heating equipment in the cage and connect it to the thermostat function outlet.
● Install the lighting equipment in the cage and connect it to the timer function outlet.
● Fix the sensor in the cage at the desired temperature monitoring location (a spot not directly exposed to heat from the heating equipment and where the pet cannot easily tamper with it) using the included suction cup.
● Set the current time, control temperature, and timer to operate. Refer to the instruction manual for detailed setting instructions.
*This product requires separate heating and lighting equipment for reptile and amphibian keeping.